Tekno is a material primarily composed of a combination of a natural mineral and high-quality acrylic resin. This allows it to remain unchanged over time, preserving its original color without yellowing. Tekno is a compact, hygienic, and fireproof material that enables elegant and high-performance installations. The compact and non-porous surface is durable and easy to clean with common household cleaning products.

USE AND MAINTENANCE
Tekno is a resistant and durable material, but like all high-quality products, it can be damaged if used improperly. For easy maintenance and long-lasting use of a washbasin or a top in Tekno, we list a series of recommendations to follow, so you can be satisfied with the purchased product for many years:
1. As a general maintenance treatment, we recommend cleaning the surface with warm water and a mild detergent, using a soft, damp cloth or sponge. Then dry with a soft cloth.
2. In the case of stains caused by hard water, soaps, or mineral products, clean with a descaling detergent (e.g., vinegar, VIAKAL®, AJAX®, CIF® descaler). Finish cleaning with warm water and a soft cloth. Then dry with a soft cloth.
3. In the case of stains of another nature (marker, lipstick, grease, food residues, etc.), clean with an ammonia-based detergent (e.g., CIF® ammoniacal). Finish cleaning with warm water and a soft cloth. Then dry with a soft cloth.
4. In the case of particularly stubborn stains or small cuts and scratches, use an abrasive cleaner (e.g., VIM®, AJAX®) and an abrasive sponge (e.g., SCOTCH-BRITE®). Finish cleaning with warm water and a soft cloth. Then dry with a soft cloth.
5. In the case of cigarette burns or small cuts, use a sequence of abrasive papers 180/240/320 and finish with SCOTCH-BRITE®, taking care to clean the area with warm water and a soft cloth between each paper.

Mineralguss is a composite material in which the internal mass, made from a combination of a natural mineral and polyester resin, serves as a support for the surface film. Therefore, it is not a plastic material, but rather an elegant mineral compound to the touch, hygienic and suitable for bathroom and public space furnishings. The gelcoat film that covers the surface of the material provides excellent resistance from both a physical and, above all, chemical standpoint. Mineralguss is a highly ductile material, resistant to humid heat, cigarette burns, and dry heat.

MAINTENANCE: to remove dirt, limescale, and stains that normally accumulate on the surface, it is sufficient to clean with soapy water or common non-abrasive cleaners used with a non-abrasive sponge or cotton cloth, taking care to rinse the surface well. Good and consistent maintenance, without excessive use of unsuitable soaps or cleaners, preserves the shine.

Ocritech is an innovative material made of pure cast acrylic without mineral fillers, which, thanks to its composition, is very lightweight. The advantages of Ocritech are numerous: it is extremely resistant to impacts, heat (max. 80°), various types of diluted acids, and alkaline substances. It is easy to clean and maintains its color stability over time, being a material invulnerable to UV rays. Among its features, it also stands out for its resistance to the absorption of certain commonly used cosmetic and beauty products, such as hair dye. For the daily cleaning of Ocritech matt washbasins, use a Scotch Brite sponge on the dry surface, then rinse with water and subsequently dry with a microfiber cloth.

The exterior of FENIX NTM is obtained with the aid of nanotechnologies and is characterized by a surface treated with next-generation acrylic resins, hardened and fixed through the Electron Beam Curing process. With low light reflection, its surface is extremely matte, fingerprint-resistant, and pleasantly soft to the touch. In addition to its main features, such as the repairability of micro-scratches, this innovative material is distinguished by specific properties that facilitate normal cleaning processes and do not require special maintenance: extreme ease of cleaning, high reduction of bacterial load, and anti-mold properties, great resistance to rubbing, scratches, and abrasion, as well as to acidic solvents and household reagents.
To achieve the best results in cleaning FENIX NTM, it is always good to remember some precautions:
• although very resistant, the surface of FENIX NTM should never be treated with products containing abrasive substances, abrasive sponges, or unsuitable tools, such as sandpaper or steel wool;
• products with a high acid content or very alkaline should be avoided as they may stain the surface;
• when using solvents, the cloth used must be perfectly clean so as not to leave streaks on the surface of FENIX NTM. Any marks can still be removed by rinsing with hot water and drying;
• avoid furniture polish and, in general, detergents containing waxes because they tend to form a sticky layer on the compact surface of FENIX NTM to which dirt adheres.

ORDINARY MAINTENANCE
The surface of FENIX NTM should be cleaned regularly but does not require special maintenance: a damp cloth with warm water or detergents are sufficient. All normal household cleaning or disinfectant products are well tolerated. The use of a magic sponge is recommended for regular cleaning and maintenance of the surface.

The tops in extralight glossy and satin glass with integrated washbasin, 1 cm thick, feature a flat polished edge and are available in 56 colors. They undergo a water-based coloring with polyurethane protection. The paint used is a water-based, pigmentable, anti-yellowing single-component suitable for glass painting. Any small imperfections and differences from the sample should be considered a characteristic of the artisanal processing that makes each individual piece unique in its kind.

INSTALLATION INSTRUCTIONS
Use only the neutral silicone provided, taking care not to scratch the colored parts. To secure the glass top, use NEUTRAL NON-ACETIC SILICONE. When installing the mixer, siphon, waste, etc., be careful not to create tension in the glass basin by over-tightening. Always ensure to insert the silicone rubber gaskets between all metal parts in direct contact with the glass, otherwise, it may break.

Solid Glass is a material produced through a process of melting and crystallization of silicon and glass particles. The sheets of this material are a mix of inorganic elements, therefore they do not undergo state changes. The material possesses the properties of both glass and ceramic, making it hard and durable, as well as eco-friendly and fully recyclable.

High-pressure laminates combine their excellent aesthetic qualities with properties and virtues of great interest for those designing or creating interior design solutions, starting from versatility and robustness. It is a material that is both easy to work with and extremely strong: resistant to scratches, impacts, abrasions, chemicals, and heat. These characteristics make it ideal for a wide range of applications. They are antibacterial and fireproof panels, therefore particularly suitable for applications in public places or in all cases where a high level of hygiene is particularly important. HPL panels are impact-resistant, withstand blows from blunt objects well, are scratch and wear-resistant, and stable to light and UV rays.

SWISSCDF is a wood fiber panel, compactly compressed (>1,000 kg/m3) and dyed black. With its support plate and multilayer structure, SWISSCDF sets new standards in the interior furniture sector in terms of both design and construction. Stability, scratch resistance, splash resistance, and low flammability characterize this natural wood material.

Wide range of 56 colors available. Special care is required to avoid scratching the lacquered surfaces, so abrasive powders, ammonia, and acetone cannot be used. Furniture waxes should also be avoided. For proper cleaning, it is sufficient to use glass cleaning products or alcohol diluted with plenty of water, taking care to dry the surface immediately with soft, non-abrasive cloths. The protective acrylic velvet finish is a transparent finish based on acrylic characterized by a high matte effect and a softness similar to silk. The advantages of a protective coating applied with this product are the matte aesthetic effect and its silk touch, high chemical-physical resistance, protection of the underlying color, and providing the painted support with greater water repellency.

Grigio Efeso

The laminated board is a particle board panel coated on both sides with melamine paper, which is a synthetic material made from thin sheets of paper impregnated with melamine resin. The use of such paper means that the laminated panel is often also referred to as melamine. The thermostructured melamines offered by Arbi, thanks to the development of increasingly realistic papers, very realistically reproduce the effect of wood through heat and special plates. This feature, combined with remarkable hardness and resistance to scratches and solvents, makes melamine panels excellent solutions that are visually and tactically pleasing, at a reasonable price.